Tips For Repairing A Water-Damaged Drywall

water damage restoration sanduskyNearly every house owner has experienced flood damage whether it was from rain, a leaking pipe, or a damaged appliance such as a dishwasher. Water can sometimes be destructive, and if it comes into contact with your drywall, it could cause ugly damage to internal walls and ceilings. To make matters worse, untreated water-damaged drywall could also collapse and end up causing mold problems. To prevent the situation from worsening, you must act as promptly as possible.

Water Damage Restoration Sandusky

Here are some easy steps that any building owner can take to replace or repair water-damaged drywall.

Find The Leak

The first step is to determine where the leak is and to check your drywall to see whether or not it’s damaged. Before you proceed with anything else, repair the leak or issue you discovered. If you overlook the cause and only repair the damaged region, you almost certainly will have more damage down the road.

To fix the leak, first, you will need to switch off the water and then cut out the broken section of the pipe. Install a new pipe using the recommended method for the kind of pipe you have. Switch the water back on again and check for leaks before fixing the drywall.

Getting Rid Of Mold

Mold thrives in moist drywall due to its porous nature. If your drywall remains structurally sound but contaminated with mold, you should kill the mold by cleaning it. A bleach solution would destroy mold without creating any damage.

Within a couple of days, the bleach solution should eliminate any trace of mold and it may also remove small water smudges on the wall. 

Repair Or Replace Damaged Drywall

After removing the damaged drywall and dealing with any mold problems, it’s time to fix the damaged area. Evaluate the size of the hole to determine how much wall to trim out of a new sheet. Using drywall screws, fasten the new piece of the drywall to the damaged part.

Cover Water Stains

To conceal water stains in drywall, start by removing loose and flaking paint with a paint scraper. Then start sanding the wall with sandpaper and work your way down until the outer layer is smooth. When the drywall surface is free of stains, you may prime and paint it. Fixing drywall with small water damage is a simple task that the majority of homeowners should be able to accomplish with some research and patience.

Hire Professionals

If you are not able to address or pinpoint the source of the water damage or you are unwilling to perform your own water damage repairs, contact a qualified water damage repair service. Sometimes the degree of water damage to your house is simply too much for you to manage on your own. In some cases, the water involved may be contaminated, putting your health at risk.

Because of its porous nature, drywall is susceptible to water damage. Tiny areas can be restored and repaired, but only when the underlying water issue has been resolved. RestorePro will not just assist with water damage cleanup, but will also ensure that all moisture problems are resolved. For Water damage restoration in Sandusky, call RestorePro today.